14
SD-AT50W(A)2.fm
02/11/8
SD-AT50W
Prepar
ation for Us
e
- Remot
e
c
o
n
tr
o
l / G
e
ner
a
l c
ont
ro
l -
Remote control
!
Battery installation
Precautions for battery use:
"
Replace all old batteries with new ones at the same time.
"
Do not mix old and new batteries.
"
Remove the batteries if the system will not be used for long periods of time. This
will prevent potential damage due to battery leakage.
Caution:
"
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
"
Installing the batteries incorrectly may cause the system to malfunction.
Notes concerning use:
"
Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
"
Periodically clean the transmitter on the remote control and the sensor on the AV
control unit with a soft cloth.
"
Exposing the sensor on the AV control unit to strong light may interfere with oper-
ation. Change the lighting or the direction of the AV control unit.
"
Keep the remote control away from moisture, heat, shock, and vibrations.
!
Test of the remote control
Check the remote control after checking all the connections (see pages 8 - 10 and 12).
Point the remote control directly at the remote sensor on the AV control unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you can enjoy your system.
General control
!
To turn the power on
Press the ON/STAND-BY button.
The power indicator lights up.
If the power does not turn on, check if the power leads are plugged in properly.
!
Volume control
Press the button to increase the volume and the VOLUME - button for
decreasing.
!
To change the display brightness (2 levels)
You can change the brightness of the AV control unit display by holding down the
DISPLAY button on the remote control for 2 seconds or more.
1 Open the battery cover.
2 Insert the batteries according to the direction indicated in the bat-
tery compartment.
When inserting or removing the batteries, push them towards the battery terminals.
3 Close the battery cover.
0.2 m - 6 m
(8" - 20')
Remote sensor
AV control unit
Dimmed
Brightened
Power indicator
0
1
2
39
40
.....
