E-11
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Pr
epara
tion f
o
r Us
e
- S
yst
em
in
st
alla
ti
o
n
-
System installation
"
Placing the speaker system
The best surround effect will be achieved by placing each speaker at the same
distance from the listening position.
It is recommended to arrange the speakers as shown below.
Notes:
!
Place the TV halfway between the front speakers.
!
It is recommended that the centre speaker be placed near the television.
!
Place the surround speakers at a position just above the height of your ears.
!
The subwoofer vibrates whilst reproducing bass. Place it on a stable, sturdy sur-
face.
!
The subwoofer reproduces bass. Place it anywhere you like.
!
Do not allow any objects to fall into or to be placed in the bass reflex ducts.
!
Front and centre speakers are magnetically shielded.
!
The speakers grilles are not removable.
"
Cooling fan
Caution:
!
The unit will get warm whilst being used. Do not touch the warm areas of the unit
for prolonged periods to avoid damage to you.
!
A safety circuit protects the amplifier from damage. When it is activated, the sound
switch is turned off. In this case, set the unit to the stand-by mode and turn on
again.
Note:
The default distance is set to 2 m. If speakers cannot be placed at equal distances,
refer to "Speaker delay setting" (see page 52).
Installation image:
Front
speaker (left)
Subwoofer
Front
speaker (right)
Surround
speaker (left)
Surround
speaker (right)
Default setting:
2 m
Centre
speaker
This unit is fitted with a cooling fan at the rear for improved cooling. Do not cover the
opening in this section with any obstacles.
Cooling fan
Front speaker (left)
Front speaker (right)
Centre speaker
Downloaded from: