E-52
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
F
S
V
I
N
P
E
D
SD-PX15H
Ad
v
a
nced
F
e
atures
- Cha
n
ging the
de
fa
ult s
e
ttings
of the
a
m
pli
fie
r -
When you select "LARGE", all channel signals are sent to the speaker.
When you select "SMALL", frequencies below 120 Hz are sent to the subwoofer.
(*) indicates the default setting.
Notes:
!
On some DVD-Audio or SACD discs, the subwoofer may not produce sound even
if the speaker size is set to "SMALL".
!
You do not need to adjust the speaker size of the supplied speakers.
!
The speaker size setting is not available when the input is set to tuner, or the sur-
round is "STEREO" or "VIRTUAL".
!
When the centre and surround speakers are not connected, set the speaker size
to "C-NO" and "S-NO". Otherwise, the protection circuit may be activated and the
power is turned off.
"
Speaker delay setting
When some of the speakers are at a different distance from the listening point, you
can select the speaker delay to make it seem as though the speaker distances are
the same.
Notes:
!
The speaker delay setting is only available for the front speakers and subwoofer if
the input is set to tuner, or the surround is "STEREO" or "VIRTUAL".
!
The speaker delay setting is invalid whilst playing DVD-Audio or SACD discs (valid
for the CD layer of SACD discs).
4
Within 10 seconds, press the or button to
select their sizes.
To set sizes of other speakers, repeat the operation
from step 3.
5
Press the RETURN
button twice.
The setting is complete.
Speaker type
Speaker size
Front speaker (Left, Right)
F-SMALL *
Small diameter
F-LARGE
Large diameter
Centre speaker
C-SMALL *
Small diameter
C-LARGE
Large diameter
C-NO
OFF
Surround speaker (Left, Right)
S-SMALL *
Small diameter
S-LARGE
Large diameter
S-NO
OFF
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
2
Within 10 seconds, press the or button to
select "SP DELAY", and press the ENTER
button.
3
Within 30 seconds, press the or button to
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 30 seconds, press the or button to
select the distance.
!
You can change the distance in 0.1 m steps.
!
To set the distance of other speakers, repeat the op-
eration from step 3.
5
Press the RETURN
button twice.
The setting is complete.
Speaker type
Delay range
Default setting
FL
Front speaker (Left)
0.1 to 9.0 m
2 m
CT
Centre speaker
0.1 to 9.0 m
2 m
FR
Front speaker (Right)
0.1 to 9.0 m
2 m
SR
Surround speaker (Right)
0.1 to 9.0 m
2 m
SL
Surround speaker (Left)
0.1 to 9.0 m
2 m
SW Subwoofer
0.1 to 9.0 m
2 m
5
SHARP TI
NSZ
A
0
5
2
A
WZ
Z
Downloaded from:
