E-63
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Ad
v
a
nced
F
e
atures
- Conne
c
ting othe
r e
quipme
n
t / M
a
inte
na
nc
e
-
Connecting other equipment (continued)
An optical digital cable is not supplied.
"
Digital connection to a digital audio
recorder, etc.
You can record sound on a digital audio recorder by connecting to the digital audio
output socket using an optical digital cable.
When connecting a digital audio recorder to the digital audio output socket, set
"
DIGITAL" to "D-PCM" (see page 48).
To record sound on a digital audio recorder:
Turn the power on and press the button.
Notes:
!
Some discs are copy protected and digital recording is not possible (including DTS
signals).
!
The digital audio output socket sends signals coming from a DVD/CD, the digital
audio TV input socket, and digital audio input socket. Signals from the tuner, audio
TV input sockets and the audio VCR input sockets are not sent.
!
When you play DVD-Video discs with Linear PCM sound recorded at a 96 kHz
sampling rate, sound may be sampled at 96 kHz (or 48 kHz depending on the
disc).
!
The digital audio output socket does not send signals coming from SACD or
MP3 discs.
!
In DVD-Audio playback, the digital audio output socket does not send some
signals. Also, the sampling rate of digital audio signals may reduce or no
signals may be sent.
!
Plug in each cable fully to prevent noise interference.
Maintenance
"
Cleaning the cabinet
"
Cleaning the laser pickup lens
Notes:
!
Close the sliding door when it is not used.
!
Be careful not to damage the optical pickup or to touch it by hand.
Turn off the other equipment before making this connection.
To optical digital
audio input socket
Optical digital cable
(commercially available)
Digital audio
recorder, etc.
BITSTREAM
For 5.1 channel Dolby Digital/DTS surround processors, etc.
D-PCM
For 2 channel digital input amplifiers, etc.
Periodically wipe the cabinet with a soft
cloth and a diluted soap solution, then with
a dry cloth.
!
Do not use chemicals for cleaning
(petrol, paint thinner, etc.). It may dam-
age the cabinet finish.
!
Do not apply oil to the inside of the unit.
It may cause malfunctions.
Do not touch the laser pickup lens. If fin-
gerprints or dust accumulate on the pick-
up, clean it gently with a dry cotton swab.
Laser pickup lens
Downloaded from:
