E-67
SD-PX15H_SEEG_E.fm
04/2/9
ENGLISH
TINSZA052AWZZ
SD-PX15H
Re
fe
re
nc
es
-
T
rou
b
le
s
h
ooting
c
h
a
rt /
S
p
e
c
ifi
c
a
ti
o
ns
-
Troubleshooting chart (continued)
"
Tuner
"
Remote control
"
Condensation
Sudden temperature changes, storage or operation in an extremely humid environ-
ment may cause condensation inside the cabinet (laser pickup, etc.) or on the trans-
mitter on the remote control.
Condensation can cause the unit to malfunction. If this happens, leave the power on
with no disc in the unit until normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before operating the unit.
"
If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
Caution:
When you reset, all data is deleted and the settings return to the default. (DVD initial
settings are retained.)
Specifications
As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
"
General
Symptom
Possible cause
Reference
page
The radio makes unusual
noises continuously.
!
Is the unit placed near the TV or
computer?
!
Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead or the
unit if located near.
P. 14
The preset channel cannot
be recalled.
!
Did you remove the plug from the
AC socket, or did a power failure oc-
cur?
P. 38
Set the channel again.
Symptom
Possible cause
Reference
page
The remote control does not
operate properly.
!
Is the battery polarity respected?
P. 16
!
Are the batteries dead?
!
Is the distance or angle incorrect?
P. 16
!
Are there any obstructions in front of
the unit?
!
Is the remote control sensor ex-
posed to strong light (inverter fluo-
rescent light, direct sunlight, etc.)?
P. 16
!
Is the remote control for another
equipment used simultaneously?
The unit cannot be turned on
with the remote control.
!
Is the AC power lead of the unit
plugged in?
P. 16
!
Are the batteries inserted?
P. 16
If such a problem occurs, do the following:
Clearing all the memory (reset)
1
Unplug the unit.
2
Whilst holding down the ON/STAND-BY but-
ton, plug in the AC power lead.
"RESET" appears for about 1 second and the
power turns off.
Power source
AC 230 V, 50 Hz
Power consumption
50 W
Dimensions
Width: 368 mm
Height: 245 mm
Depth: 114 mm
Weight
3.7 kg
Audio output termi-
nals
Front speakers, Centre speaker, Surround speakers and
Subwoofer: more than 4 ohms (4 ohms min.)
Headphones: 16 - 50 ohms (recommended: 32 ohms)
Subwoofer Pre Out: RCA type 1
Optical digital output: Square type 1
Audio output (VCR): RCA type 1 pair (L/R)
Audio input terminals
Audio input (TV, VCR): Cinch type 2 pairs (L/R)
Coaxial digital input (AUX): RCA type 1
Optical digital input (TV): Square type 1
Monitor output termi-
nals
SCART output: SCART terminal 1
Video output: RCA type 1
S-video output: S-terminal 1
5
SHARP TI
NSZ
A
0
5
2
A
WZ
Z
Downloaded from:
