E-26
SD-SH111(U)E3.fm
02/11/20
SD-SH111
ENGLISH
7
Pr
epara
tion f
o
r Us
e
- Se
tting the
c
loc
k
-
Setting the clock
By setting the unit on time, you can use it not only as a clock but also for timer play-
back.
[Back]
In this example, the clock is set for 9:30 AM.
[When the power is on]
Press the TIMER button.
Within 10 seconds, press the or button to select "CLOCK".
The time display will appear for about 10 seconds.
To readjust the clock:
Perform "Setting the clock" from the beginning.
z
In step 2, "TIMER STANDBY" appears. If the clock is cleared, “SLEEP” appears.
z
In step 3, press the or button to select "CLOCK", and the press the ENT but-
ton.
Caution:
Unplugging the unit or power failure will clear the clock setting.
Perform "Setting the clock" from the beginning.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TIMER button.
3
Within 10 seconds, press the or button to select "ADJUST",
and then press the ENT button.
4
Press the or button to adjust the
hour and then press the ENT button.
"AM 12:00" is 12 o'clock midnight.
"PM 12:00" is 12 o'clock noon.
z
Press the or button once to advance the time by 1 hour. Hold it down to
advance continuously.
z
The 12-hour display will appear.
z
"AM" will change to "PM" automatically.
5
Press the or button to adjust the
minutes and then press the ENT but-
ton.
z
Press the or button once to advance the time by 1 minute. Hold it down
to advance continuously.
z
The hour will not advance even if minutes advance from "59" to "00".
z
The clock starts from "0" second. (Seconds are not displayed.)
To confirm the time display:
[When the unit is in the stand-by mode]
Press the DISPLAY button on the remote control.
The time display will appear for about 5 seconds.
