WiHD Receiver unit
HDMI cable
AC adapter for WiHD Receiver unit
Screw for wall mount adapter (x2)
Wall mount adapter for WiHD Receiver unit
WiHD Settings
WiHD Receiver Connection
•
Position the WiHD Receiver close to the TV or
other display monitor.
•
Position the WiHD Receiver horizontally.
1
Using an HDMI cable (supplied), connect the TV
or other display monitor to the HDMI OUTPUT
terminal of the WiHD Receiver.
2
Connect the AC adapter (for WiHD Receiver) to
the DC IN terminal of the WiHD Receiver.
3
Plug the AC adapter (for WiHD Receiver) into an
AC outlet.
4
Turn WiHD power on and off by pointing the
remote control at the Receiver and pressing
WiHD ON/OFF
on the remote control.
It may not be turned off while the video signal
is being transferred.
Wall mounting
1
Place the wall mount adapter for WiHD Receiver
unit (supplied) against the wall, and mark the
positions of the screw holes on the wall with a
pencil or the like.
2
Using screws (commercially available), fix the
wall mount adapter to the wall.
3
Using the screws for wall mount adapter
(supplied), attach the WiHD Receiver to the wall
mount adapter.
NOTE
•
Communications are not possible from one room to another, or where there are other
obstacles. Communications only take place within a room.
•
Use the transmitter and receiver for one-to-one operation.
•
You can use up to two pairs of WiHD at the same time.
•
The AC adapter may become warm after long-time use. This is normal and does not
indicate malfunction.
Things you will need (commercially
available)
•
Two screws for attaching the wall mount adapter to the
wall
The type and length of screw required depends on the
material and strength of the wall.
Consult a retailer or contractor when obtaining the
screws.
Recommended screw dimensions (mm)
3.8-4.2
7.8-8.4
CAUTION
•
Do not place anything other than the WiHD Receiver on
the wall mount adapter.
Tripod mounting
Use the threaded hole for tripod mounting to fix the
receiver/wall mount adapter to the tripod.
20
Connection
Threaded hole for
tripod mounting
Tripod, etc.
(commercially available)
3
Screws for wall mount adapter
(supplied)
2
Screws (x2)
(commercially available)
1
TV or other display monitor
HDMI input terminal
HDMI cable
(supplied 1 pc.,
commercially available)
WiHD Receiver
1
2
3
Antenna