2
WARNING
1. This refrigerator is airtight. TO PREVENT
FATAL ACCIDENTS TO CHILDREN,
please completely remove the door prior
to discarding the refrigerator.
2. Highly volatile and inflammable materials
such as ether, petrol, propane gas, adhe-
sive agents and pure alcohol etc. are li-
able to explode. Do not store these mate-
rials in the refrigerator.
3. To prevent damage to the outer cabinet,
avoid contact with lacquer, and paint, etc.
4. When cleaning your refrigerator, do not
splash water directly on the outer cabinet
or the interior. This may lead to rusting and
deterioration of the electrical insulation.
5. If any areas adjacent to electrical compo-
nents have to be cleaned, unplug the re-
frigerator first to prevent electric shock,
then wipe the area with a dry cloth.
6. Should electrical components be acciden-
tally immersed in water, unplug the refrig-
erator, dry the parts and contact your near-
est service agent approved by SHARP.
7. This refrigerator is designed solely for the
purpose of storing foodstuff for domestic
use in accordance with the instructions
given in this manual. Using the refrigera-
tor for other purposes might be harmful to
persons or property.
8. This refrigerator is not suitable for the stor-
age of materials requiring precise tempera-
tures. Deterioration of these materials will
be dangerous.
9. Dust deposited on the power plug may
cause fire. Wipe it off carefully.
10. When replacing the lamp bulb, unplug the
refrigerator first to prevent electric shock.
11. Do not attempt to change or modify this
refrigerator. This may result in fire, electric
shock or injury.
12. Information regarding disposal of the
appliance
1. Do not touch the compressor unit, as it
can become extremely hot during op-
eration.
2. If the power supply is accidentally dis-
connected, please wait for at least 5
minutes before re-connecting the
power, as back pressure in the com-
pressor may trip the overload relay.
3. Avoid removing food from the freezer
with your bare hands. Directly touching
products stored at sub-zero tempera-
tures can result in frostbite.
4. To prevent accidental power disconnec-
tion, plug the refrigerator directly to the
source. Do not use a double adaptor
as loss of power could lead to the spoil-
ing of the stored food.
5. Do not place bottles in the freezer as
they may crack when frozen.
6. Keep the door securely closed. If the
door is left ajar, the controlled inner tem-
perature will rise, resulting in food spoil-
age and increase in electricity costs.
7. Do not install the refrigerator in a damp
or wet location as this may cause dam-
age to the insulation and a leak. Con-
densation may also build on the outer
cabinet and cause rust.
8. When installing or moving the refrigera-
tor, make sure that you do not nip or
kink the power cord. Damage of the
power cord may cause electric shock
or fire.
9. Do not use this refrigerator when the
power cord or plug is damaged, or the
outlet attachment is loose, as they may
cause electric shock or fire.
10. Disconnect from the mains electricity
supply by removing the mains plug from
the electricity supply socket. Do not re-
move by pulling the mains lead. This
may cause electric shock or fire.
11. Make sure that you leave adequate ven-
tilation space around the refrigerator to
prevent the compressor from overheat-
ing and stopping. Please follow the in-
structions given for installation.
CAUTION
Flammable insulation blowing gases
should be disposed appropriately. Take the
cabinet and doors to a recycling plant for
flammable insulation blowing gases.
7
CARE AND CLEANING
Some household cleaning chemicals may affect the inside sur-
faces and plastic shelves resulting in splitting or cracks occur-
ring.
1.Remove the shelves and pockets from the cabinet and door. Wash them in warm soapy dishwashing
water; rinse in clean water and dry.
2.Clean the inside with a cloth soaked in warm soapy dishwashing water. Then, use cold water to
wipe off soapy water.
3.Wipe the exterior with a soft cloth each time it is soiled.
4.Clean the Magnetic door seal with a toothbrush and warm soapy dishwashing water.
5.Whenever the refrigerator is moved to clean or repositioned, the Evaporating pan should be
removed and cleaned.
When cleaning all plastic parts inside this refrigerator, only use
diluted dishwashing liquid(soapy water). Make sure that all plas-
tic parts are thoroughly rinsed with water after cleaning.
NOTE
• Do not use polishing powder, benzine, hot water etc.
• If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts
can result.
• Wipe any food oils adhered to plastic components as they can cause cracking of the plastic sur-
face.
Evaporating pan
How to remove
Pull the Evaporating pan toward
yourself.
How to set
Set the Evaporating pan so
that the two protrusions
come through its corre-
sponding holes.
Replacing the lamp bulb
Replace lamp bulb with same type.
base E12, MAX 10W,T-20
Make sure that the rated voltage and wattage of the lamp bulb are correct when replacing. (Check
the label near the bulbs).
Switching off your refrigerator
If you switch your refrigerator off when you are going away for an extended period, remove all food,
clean the interior thoroughly. Remove the power cord plug from the power socket and leave all
doors open.
Evaporating pan
When replacing the lamp bulb, unplug the refrigerator first to plevent electric shock.
