Sharp SJ-BB04DTXS1-EN, User Manual

EN -10-

CHAPTER -3: USING YOUR FRIDGE FREEZER

Accessories

Ice Tray

•  Fill the ice tray with water and place in the freezer compartment.

•  After the water has completely frozen, you can twist the tray as shown below to remove the ice cubes.

The Plastic Scraper

After some time, frost will build up in certain areas of the freezer. The frost accumulated in the freezer 

should be removed regularly. Use the plastic scraper provided, if necessary. Do not use sharp metal 

objects for this operation. They could puncture the refrigerator circuit and cause irreparable damage to 

the unit.

The Bottle Holder 

(In some models)

Use the bottle holder to prevent bottles from slipping or falling over.

Adapti-Lift Door Shelf 

(In some models)

Six different height adjustments can be made to provide storage areas that you need by 

Adapti-Lift door shelf.

To change the position of Adapti-Lift door shelf ; 

Hold the bottom of the shelf and pull the buttons on the side of the door shelf direction of 

arrow. (Fig.1)

Position door shelf the height you need by moving up and down. After you get the position 

that you want the door  shelf, release  the buttons on the side  of the door  shelf (Fig.2) 

Before releasing the door shelf, move up down and make sure the door shelf is fixed.

Note:

 Before moving door shelf is loaded, you must hold the shelf by supporting the 

bottom. Otherwise, door shelf could fall off the rails due to the weight. So damage 

may occur on the door shelf or rails.

Fig. 1

Fig. 2

Visual and text descriptions in the accessories section may vary according to 

the model of your appliance.