EN -8-
CHAPTER -3: USING YOUR FRIDGE FREEZER
Adapti-Lift Door Shelf
(In some models)
Six different height adjustments can be made to provide storage
areas that you need by Adapti-Lift.
To change the position of Adapti-Lift ;
Hold the bottom of the shelf and pull the buttons on the side of
the door shelf direction of arrow (Fig.1)
Position door shelf the height you need by moving up and down.
After you get the position that you want the door shelf, release
the buttons on the side of the door shelf (Fig.2) Before releasing
the door shelf, move up down and make sure the door shelf is
fixed
Note:
Before moving door shelf is loaded, you must hold the shelf by supporting the bottom. Otherwise, door shelf
could fall off the rails due to the weight. So damage may occur on the door shelf or rails.
Fig.1
Fig.2
Visual and text descriptions on the accessories section may vary according which model you have..
Cleaning
•
Before cleaning your fridge freezer, turn your mains supply off and remove the plug from the socket.
•
Do not wash your fridge freezer by pouring water on to it.
•
Use a warm, soapy cloth or sponge to wipe the interior and exterior of your fridge freezer.
•
Carefully remove all shelves and drawers by sliding upwards or outwards and clean with soapy water. Do not
wash in a washing machine or dishwasher.
•
Do not use solvents, abrasive cleaners, glass cleaners or all purpose cleaning agents to clean your fridge
freezer. This may cause damage to the plastic surfaces and other components with the chemicals they contain.
•
Clean the condenser at the back of your fridge freezer at least once a year with a soft brush or vacuum cleaner.
Make sure that your fridge is unplugged while cleaning.
Defrosting
Refrigerator compartment;
•
Defrosting occurs automatically in the refrigerator compartment during operation ; water is collected by the
evaporating tray and evaporates automatically.
•
The evaporating tray and the defrost water drain hole should be cleaned periodically to prevent the water from
collecting on the bottom of the refrigerator.
Freezer compartment;
•
The frost, which covers the shelves of the freezer compartment, should be removed periodically.
•
Do not use sharp metal objects for this operation. They could puncture the refrigerator circuit and cause
irreparable damage to the unit. Use the plastic scraper provided.
•
When there is more than 5 mm of frost on the shelves, defrosting must be
done.
•
Before defrosting operation, place the frozen food in a cool place after
wrapping them in sheets of newspaper in order to obtain its temperature
steady for long time.
•
To accelerate the defrosting process place one or more basins of warm
water in the freezer compartment.
•
Dry the inside of the compartment with a sponge or a clean cloth.
•
Once the unit has been defrosted, place the food into freezer and remember
to consume them in a short period of time.
