EN -14-
CHAPTER -3: USING YOUR FRIDGE FREEZER
4.
The vacuum bag should be placed up to the red lines. (About 5 cm / 3 finger)
~ 5 cm
5. The outer surface of the bag should not be wet especially lock part of bag. Otherwise, the sealing process may
not complete correctly.
6. Do not use more than one bag at the same time.
7. The mouth of the bag must be tight during the vacuuming and sealing. There should be also no wrinkles on it.
Otherwise, the sealing process may not complete correctly.
8. Vacuuming time is a maximum of 40 seconds. If the bag is not placed properly into the compartment, the system
will fail because the vacuum process is not complete and the mechanism will be in the starting position.
9. The bag should not have any holes.
10. Do not leave too much air in the bag. Before the bag is placed in the compartment, remove any excess air by
squeezing the surface of the bag as hard as possible. Otherwise the vacuum pump may not vacuum all of the air
out of the bag.
