12
Door Alarm
At
fi
rst, door alarm is set “ON”.
•
When the refrigerator door is left open, the door alarm will
•
sound.
The door alarm will sound in 1 minute after opening the door
•
and again after 1 minute (once in each case).
If the door is left open for approx. 3 minutes, the alarm will
•
sound continuously.
To cancel operation
1
Select the door alarm indication like the below
fi
gure.
2
Select “OFF”.
3
Finalize the setting.
To start operation
It is the same method as canceling operation.
Select “ON” in step 2.
At standby display
The indication will disappear.
Door alarm indication
It shows Door alarm “ON”.
At standby display
Sound ON/OFF
At
fi
rst, the sound is set “ON”.
•
Use this feature when you want to switch the sound of key
•
operation to “ON” or “OFF”.
To set sound “OFF”
Press the
key and
key simultaneously and continuously
for 3 seconds or more.
To set sound “ON”
Press the
key and
key simultaneously and continuously
for 3 seconds or more again.
It shows the sound “OFF”.
The indication will disappear.
Lighting ON/OFF
Use this feature when you want to switch the lighting of
•
control panel when opening the door to “ON” or “OFF”.
To set “OFF”
Press the
key and
key simultaneously and continuously
for 3 seconds or more.
The display will be turned off.
To set “ON”
Press the
key and
key simultaneously and continuously
for 3 seconds or more again.
Beep beep beep
Beep
Flashing
Beep beep beep
Beep beep beep
(B484)W̲1.indb 12
(B484)W̲1.indb 12
2013/10/11 10:50:00
2013/10/11 10:50:00
