Sharp SJ-FS676V, Operation Manual

7

Energy Saving

Use this feature when you want to switch the appliance to 

energy-saving operation.

To start operation

1

Select “Energy saving” icon.

(The icon is green.)

2

Select “ON”.

3

Finalize the setting.

Additionally the handle indicator (Green) will blink  

3 times.

Handle indicator in operation

Every time you close the door, the indicator will flash 

•

(Green).

If Plasmacluster is also in operation, the indicator will flash 

•

6 times.

(Blue→Green→Blue→Green→Blue→Green)

To cancel operation

It is the same method as starting operation.

Select “OFF” in step 2.

NOTE

While this feature is operating, the inside temperature of the 

•

refrigerator and freezer compartment will be higher than the 

preset temperature by about 1°C(refrigerator) and about 

2°C(freezer). This is the guide under the condition of the 

preset temperature 3°C(refrigerator) and -18°C(freezer). The 

display of preset temperature will not be changed.

The efficiency of power saving depends on the usage 

•

environment (controlling temperature, ambient temperature, 

frequency of opening or closing the door, amount of food).

Cancel this feature when you feel the beverages are not 

•

cooled enough or ice making takes time.

Tips for saving energy

Keep the ventilation space as much as possible around 

■

the refrigerator.

Keep your refrigerator out of direct sunlight, and do not 

■

place next to heat generating appliance.

Open your refrigerator door as briefly as possible.

■

Hot foods should be cooled before storing.

■

Place the food evenly on the shelves to allow the 

■

cooling air to circulate efficiently.

Flashing

(B351)P2-P19_Eng.indd   7

2012/08/20   10:04:26