35
■
2
You can use left side free set shelf in the same way.
1
•
Do not use with removing the free-set shelf on one side.
Fixed partition becomes unstable and it may be the cause of
free set shelf falling down.
•
Do not apply weight on the fixed partition by leaning
food, etc.
The free set shelf does not move correctly and
it may be the cause of falling down.
•
Be careful of those things;
1
2
Fixed partition
You can change the position of the
shelves and door pockets as you like.
Note
Do not place food only at the
back side of free set shelf
pressed into.
(Because the free set shelf
rotates)
Do not use the shelf at its middle position.
(Cause of falling down from a rail)
Pull out until it engages to the tab.
Tab
Rail
Door pocket
Shelf
Free set shelf
Lift up to remove,
and insert in to the
other hooks.
How to change
the level
■
How to change
the level
Pull it to the position
shown in the picture.
Move the shelf up and
push in.
(Put a hook of the shelf to the tab
on the wall)
Can be changed without removing
the shelf to the outside of the
compartment.
1
2
Pull the shelf slighty.
(Position of the light is
a rough indication)
Tab
Hook
Hook
2 stages
(Each shelf)
2 stages
3 stages
Tall food
Large food
Lift the front
part and push
in.
Bring up in
the back.
Summary of Contents for SJ-GF60A
Page 55: ......
Page 56: ...Printed in Japan TINSJB478CBRZ 16JK 3 SHARP CORPORATION ...
