SJGF60XT
27
REFRIGERATOR COMPARTMENT DISASSEMBLY
2.
Main component
Contained parts
RC box ass’y
Gear pump, R-thermistor, fan motor
Pipe cover
-
R-shower duct ass’y
Catalyzer
D-PCI box ass’y
Plasmacluster unit, indicator PWB K-GF60X, D-fan motor PCI, Motor, O catalyzer
Remove the accessories (shelf, chilled case, etc.).
1.
Remove the chilled shelf stopper.
2.
Raise the back of the shelf slightly from the bottom,
and pull it to the front.
Chilled shelf stopper
C case cover
Freeset stay
How to remove freeset stay
1)
Insert a thin
fl
athead screwdriver and push the entire
part toward the direction of arrow while twisting it to
take it off.
Freeset stay
How to remove C case cover
2)
C-shelf ass’y (back side)
C case cover
(C-shelf ass
’y
with the C case cover attached)
Unhook three claws at the back and pull out the
protrusions in front.
Claws at the back
: Protrusion
C case cover
Installation is the reverse procedure to removal.
•
How to remove chilled lock
3)
Unhook two claws (if they are tight and stuck, insert
a thin flathead screwdriver (or a steel scale) to
unlatch them) and open the cover.
Remove one screw.
Claws
Chilled lock
Screw
Remove partition support l and partition stay.
3.
Pull it while holding it up slightly.
Partition support l
Partition stay
