After washing the water
tank with water ,
fill the tank with water
and set into the unit.
49
1
1
1
2
2
2
3
3
3
1
1
1
2
2
2
3
3
3
2
2
2
page 60
3
3
3
Auto Ice Maker (turning off)
Turn the setting to OFF when
ice cubes are not needed.
SetupSetup
Setup
Select " "
Press "Select". (Operation stops)
Beep
Beep
Beep
…
Beep
…
Blinks
Blinks
Blinks
Blinks
Blinks
Lights
up
Lights
up
Lights
up
Lights
out
Will immediately
return to normal
display.
" " disappears.
Dry the purifier filter in shade.
Discard the water inside the water tank and set it in its specified position.
To set making ice cubes again
<When it will be OFF for a long time (such as in winter)>
Press
"Select".
Select " "
Operation starts up.
" " will be
displayed.
<After a long period of
stopping (such as in winter)>
Notes
The water in the ice tray will be frozen as is. After ice cubes are released, the ice tray will be empty.
About 2 hours may be required for ice cubes to be released.
Ice cubes will not be released when the ice case is full.
Ice Tray Cleaning
Use this feature when cleaning the ice tray (or pipe) .
At the beginning or when refrigerator has not
been used some time.
Fill the water tank with
water and set into the unit.
Operate steps (1)-(4)
listed to the right.
Operate steps (1)-(4)
listed to the right.
Lastly, dispose of the water
in the ice case.
When not using the refrigerator for some
time or when moving the refrigerator.
Emptying Ice Tray
Empty the water tank
and set into the unit.
Lastly, dispose of the water
or ice cubes in the ice case.
Blinks
Blinks
Blinks
Blinks
Beep
Beep
Beep
…
(1) Select " "
(2) Press "Select"
(3) Operation completes
when there is a beep.
(4) Press
"Temperature zone selection".
To clean the ice tray,
repeat (2) several times
and go to (4).
To empty the ice tray,
go to (4).
Operation requires about 40 seconds.
Button operation will not be accepted
while it is operating.
The LCD panel returns
to normal display.
Operation begins.