56
Timer
Up to 99 minutes 30 seconds can be set in interval of 30 seconds.
SetupSetup
Setup
SetupSetup
Setup
EndEnd
End
Select " "
Set time
Press "Select".
(Timer starts up)
Blinks
Lights
up
Beep
Beep
Beep
Beep
…
Beep
…
Beep
…
Set time
The remaining time
is displayed
Displays the
period for
previous setting
The LCD panel
will display the
remaining time
during Timer
operation and it
will not go OFF.
It is impossible to
set up other
menu items.
It can be set up by 30
seconds each.
(When pressed down, it is
fast forwarded by 1 minute.)
Press "-" to set to 99
minutes and 30 seconds.
Beep, beep, beep, beep …
Beep, beep, beep, beep
The completion beep will stop by pressing one of the buttons.
The LCD panel will return to normal display when the completion beep stops.
When it reaches 0 second, there will be a beep and the
screen will start blinking
(for approximately 30 seconds).
To cancel the timer
Will immediately
return to normal
display.
" " disappears.
Press "Select".
Press "Select".
Select " "
Select " "
Vacation Mode
Use this feature when going on a trip
or leaving the house.
Beep
Beep
…
Blinks
Blinks
Lights
up
Lights
up
Select " "
Press "Select". (Operation starts up)
Will immediately
return to normal
display.
" " will be
displayed.
Operation time of the compressor
is suppressed and defrosting is
performed at an optimal cycle.
About 10% power consumption
can be saved.
What is Vacation Mode?
If it is set up during Express Ice Making /
Freezing, Vacation Mode will begin after
the completion of Express Ice Making /
Freezing.
Notes
Vacation Mode operation will be
cancelled automatically when the
refrigerator compartment,
temperature zone selection
compartment and/or ice
compartment is opened and
closed 3 times in total.
Will immediately return to normal display.
" " disappears.
To cancel operation
NEXT
BACK