57
1
2
3
Foot cover
1
2
3
4
5
Cleaning the refrigerator
(Clean once a month)
Remove the power plug.
Do not insert the power plug for 5 minutes once removed as this will cause burden on the refrigerator.
Remove the shelves and pockets from the cabinet and door. Wash them in warm
soapy water; rinse in clean water and dry.
Clean the inside with a cloth soaked in warm soapy water. Then, use cold water to wipe off soapy water.
Wipe the exterior with a soft cloth each time it is soiled.
Clean the Magnetic door seal with a toothbrush and warm soapy water.
Easily dirtied parts
Foot cover, Back of refrigerator, floor and walls
Door packing
Wipe with soft, dry cloth.
Clean frequently. It damages quickly
when dirty. Thoroughly clean the
lower part of Refrigerator compartment
and vegetable compartment.
Replace when damaged.
Control panel
Thoroughly wipe off accumulated dirt.
Drip plate indentation
(Clean once a year)
Remove the foot cover, and turn the
right and left adjustable feet until
they are off-ground and move the
refrigerator.
Adjustable
feet
Transport
wheels
(Front, back, left and right)
Wipe off dirt. Absorb dust with a
vacuum cleaner.
Wipe off dust
from the power
plug as well.
Remove the dust
inside the foot cover
as well.
Insert the tabs (right and left) on the
foot cover into the holes (right and left)
on the main unit. Insufficient attachment
may lead to abnormal noises.
Tab
Hole
Hole
Notes
When using chemical rags
, be sure to follow the
accompanied directions.
About the stainless tray
Salt adhered on the tray may cause rusting. In this
case, clean the tray with kitchen detergent (cream-type
cleanser, etc.) as quickly as possible.
Do not use nylon scrubbing brushes. The tray may
become scratched.
Do not use polishing powder, benzine, hot water etc.
If undiluted detergent is used or soapy water is not wiped
off thoroughly, cracking of plastic parts can result.
Wipe any food oils adhered to plastic components
as they can cause cracking of the plastic surface.