59
Temperature zone selection compartment case
Removing
Removing
Removing
Mounting
Mounting
Mounting
Shelf
Lift up front side,
pull it halfway
Recline shelf downwards,
and remove.
Place the back side of the shelf on the rails
and insert by fitting the tabs on the front rails.
Three position adjustable shelf
Press in the
front section,
Pull up to remove.
Lift up front side,
place tab of case
on rail, and insert.
Pull up to remove.
The front section and the back
section.
Push in the front section
into the back section,
Put in the right and left
tabs as shown,
Pull the front section.
Tabs
Tab
Place tip on rail as
in right figure,
insert by lifting
up door.
Case
Case
Rail
Rail
Back section
Front section
It cannot be removed and
washed with water.
Remove the fresh case
and wipe both sides of
the shelf.
Top shelf in Fresh case
If Freeze compartment and Vegetable
compartment doors become loose
Notes
Shelves cannot be removed in
some cases if the doors cannot
be opened fully (more than 90
°
).
Lubricant (silicone grease) is
applied on the crispers and cases
to facilitate sliding. Do not wipe it off.
Do not remove accompanying
parts with foods stored.
Accompanying parts become
heavy and injury may occur as a
result of foods and parts dropping.
Do not leave the refrigerator
compartment doors open for
a long time.
The compartment lamp cover
will become hot.
Do not drop or apply strong
impacts on plastic parts.
They may become cracked.
Rail