SJ-WS320T-S
39
4. DEFROST HEATER ASSEMBLY
1. Taking-out Evaporator
1. Take-out Fan louver.
2. Take-out E.V cover ass’y.
Figure A-1
3. As shown in Figure A-2, pull the upper part of
Evaporator toward you, pull it diagonally so that the
pipe of Evaporator does not contact the convex part
of food liner.
Figure A-2
4. Pull the Evaporator for remove as shown in Figure
A-3.
NOTE: When pulling Evaporator and bending the
pipes,pay attention so as not to break and deform
the pipes. Still, take care not to hurt yourself by fin of
Evaporator.
Figure A-3
Evaporator
Food liner convex part
Food liner convex part
Evaporator
Pipe
Evaporator
2. Replacement of Def. heater ass’y.
1.Remove the Ev cover al,the Fl al sheet.
Remove the Screw.
2. Take off the Drain support al from the food liner.
Figure A-4
3. Raise the protrusion part of Drain support al.
Then remove Heater cover.
Figure A-5
4. Open Def.heater fixed part of Drain support al to
the right and left, then remove Def.heater ass’y.
Figure A-6
Drain support al
Protrusion part of Drain support al (2 pcs.)
Heater cover
Def. heater ass'y
Protrusion part
Heater cover
Drain support al
Fixed parts
Def. heater ass'y
Drain support al
