EN -6-
CHAPTER -1: SAFETY INSTRUCTIONS
• For safe operation, it is important that your freezer is seated securely and balanced. The adjustable feet are used
to level your freezer. Make sure that your appliance is level before placing any foodstuffs inside it.
• We recommend that you wipe all shelving and trays with a cloth soaked in warm water mixed
with a teaspoon of bicarbonate of soda before use. After cleaning, rinse with warm water and dry.
• Install using the plastic distance guides, which can be found at the rear of the appliance. Turn 90
degrees (as shown in the diagram). This will keep the condenser from touching the wall.
• Freezer should be placed against a wall with a free distance not exceeding 75 mm.
Before Using your Freezer
• Before setting up your freezer, check for any visible damage. Do not install or use your freezer if it is
damaged
• When using your freezer for the first time, keep it in an upright position for at least 3 hours before plugging
into the mains. This will allow efficient operation and prevents damage to the compressor.
• You may notice a light odour when using your freezer for the first time. This is perfectly normal and will
fade away as the freezer starts to cool.
CHAPTER -2: YOUR FREEZER
This appliance is not intended to be used as a built-in appliance.
1
2
3
4
5
1. Control panel
2. Freezer flaps
3. Freezer drawers
4. Levelling feet
5. Ice tray
This figure has been drawn for information purposes to show the various parts and accessories in the appliance.
Parts may vary according to the model of the appliance.
General notes:
Freezer Compartment (Freezer):
Most Efficient use of energy is ensured in the configuration with the drawers
and bins are on stock position.
