Sharp SJ-SRD450-HS2, User Manual

EN -9-

CHAPTER -5: DOOR REVERSAL

CHAPTER -6: TROUBLESHOOTING

Repositioning the door

•  It depends on which fridge you have as to whether it is possible the reverse the doors.

•  It is not possible where handles are attached at the front of the appliance.

•  If your model does not have handles it is possible to reverse the doors, but this needs to be completed by 

authorised personnel. Please call Sharp service.

Temperature  Warning:

The temperature display flashes “LC” and an audible warning sounds,  when the temperature in the cooler compartment 

is too warm.

A rise in the temperature may be caused by;

•  Frequent door opening for long periods of time

•  Loading with large quantities of warm foods

•  High ambient temperature

•  An error with the appliances.

Check Warnings;

Your fridge warns you if the temperatures for cooler departments are in improper levels or when a problem occurs in 

the appliance. Warning codes are displayed in the cooler Department Indicators. Warning codes appear in the cooler 

Compartment Setting Displays.

Also a warning sound are heard.

Showing code and buzzer will continue until you pushes SET or MODE button. When you push one of these buttons, 

buzzer will stop. “LC”  warning  will be disappear in 15 minutes. You don’t have to call your service, this condition may 

appear due to reasons above. You can keep  storing your foods in your fridge. If “LC” warning will not disappear in an 

hour after pressing the button, you can call your service.

If your fridge is operating too loudly; 

Compressor noise

Normal motor noise.

 This noise means that the compressor operates normally Compressor may cause more noise 

for a short time when it is activated.

Bubbling noise and splash:

This noise is caused by the flow of the refrigerant in the tubes of the system.

Air Blow Noise:

Normal fan noise.

 This noise can be heard in fridge during normal operation of the system due to the circulation of air.

If humidity builds up inside the cooler;

•  Are all food packed properly? Are the containers dried before placing  them in the fridge?

•  Is the ridge door opened frequently? Humidity of the room gets in  the fridge when the doors are opened. 

Humidity build up will be faster when you open the doors more frequently, especially if the humidity of the room 

is high.

•  Building up of water drops on the rear wall after automatic defrosting is  normal. (in Static  Models)

If the door is not opened and closed properly;

•  Do the food packages prevent closing of the door?

•  Are the door compartments, shelves and drawers placed properly?

Check Warnings;

Your fridge warns you if the temperatures for cooler is in improper levels or when a problem occurs in the appliance. 

Warning codes are displayed in the Cooler Indicators.

ERROR TYPE

ERROR TYPE

WHY

WHAT TO DO

SR

"Failure 

Warning"

There is/are some part(s) 

Out of order or there is a 

failure in cooling process

Contact the Sharp helpdesk as soon as 

possible.

LC

"Refrigerator comp.  

Not Cold enough"

Ideal temperature for Ref. 

Compartment is +4 

o

C. If 

you see this warning your 

foods have risk of spoiling.

1. Set the refrigerator temperature to 

colder values or set the super cooling 

mode until the compartment gets to 

normal temperature.

2. Do not open the door much until this 

failure is off.

LP

"Low voltage 

Warning"

When the power supply 

gets lower than 170 V the 

appliance gets to steady 

position.

This not a failure. This prevents any 

damages on the compressor. This 

warning will off after the voltage gets 

required level