background image

About Your Zaurus

31

3.

Plug the AC power cord into an AC outlet.

4.

Remove the SHARP I/O PORT cover of the Zaurus and then place the 
Zaurus in the Docking Station by sliding it in.
The LED indicator on the unit (charge light) will turn amber when charging 
begins.

Note:

  Make sure that the unit is fully inserted into the Docking Station.

5.

When the charging has been completed, the LED indicator will turn off. Upon 
completion, lift the Zaurus from the Docking Station. Replace the SHARP I/O 
PORT cover with the protruding part on the bottom.

6.

Unplug the AC power cord from the AC outlet and unplug the AC adapter 
connector from the Docking Station.

Note:

• 

The USB cable of the Docking Station is used to connect the Zaurus to a PC 
(PC link). It is not used for charging.

• 

Do not tilt the Zaurus forward while it is placed in the Docking Station. Do not 
pick up the unit by itself. If this is done, the unit connection terminal of the 
Docking Station may become damaged.

USB cable

Docking 
Station

AC power cord

To AC outlet

Summary of Contents for SL-6000L












































































































Reviews: