Sharp SMD2470AS, Operation Manual

10

befOre Operating

Before operating your new Microwave Drawer make sure you 

read and understand this operation manual completely.

•

  Before the Microwave Drawer can be used, follow these 

steps:

1

Plug in the Microwave Drawer.  

ENJOY

YOUR

MICRO-

WAVE

TOUCH

CLEAR

AND

TOUCH

CLOCK

 will 

appear.

2

Touch the 

STOP/

CLEAR pad. 

:

 will appear.

3

Set clock.

tO set tHe ClOCk

1

Touch TIMER/CLOCK pad and number 

2

.

2

Touch number pads for correct time of day and touch 

TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect 

clock time, 

ERROR

 will appear in the display. Touch the 

STOP/

CLEAR pad and re-enter the time.

•  If the electrical power supply to your Microwave Drawer 

should be interrupted, the display will intermittently show 

ENJOY

YOUR

MICRO-

WAVE

TOUCH

CLEAR

AND

TOUCH

CLOCK

after the power is reinstated. If 

this occurs during cooking, the program will be erased. The 

time of day will also be erased. Simply touch 

STOP/

CLEAR 

pad and reset the clock for the correct time of day.
Note: 
•  The Microwave Drawer can be programmed with the 

drawer open except for START/+30 SEC.

tiMer

1

 Touch TIMER/CLOCK pad and number 

1

.

2

  Enter time.

3

 Touch TIMER/CLOCK pad again.

To cancel timer, touch STOP/

CLEAR

.

stOp/Clear

Touch the 

STOP/

CLEAR pad to:

1

Erase if you make a mistake during programming.

2

Cancel timer.

3

Stop the Microwave Drawer temporarily during timed 

cooking.

4

Return the time of day to the display.

5

Cancel a program during cooking, touch twice for timed 

cooking.

Open Or ClOse MiCrOWave DraWer

Always press the 

OPEN/CLOSE

 pad on the control panel to 

open or close the microwave. Do not push or pull the drawer 

microwave by hand, except in the case of emergency, such as 

a power failure. If necessary, push or pull slowly.