9
Get
ting R
eady
sure that there is no gap between the cover
and the cell phone.
Move the lock slider to the “LOCK” position in
the direction of the arrow.
PULL tab
Contacts
B
A
Lock slider
When removing the battery pack, always pull up on
the PULL tab. Doing otherwise may result in damage
to the contacts.
When removing the battery pack, turn the cell phone
power off.
Before attaching the battery pack, make sure that the
au IC-Card is inserted.
When attaching the battery pack, make sure that the
battery pack cover is closed properly so that it does
not open so as to maintain water resistance.
Failure to follow the correct procedure when removing
or attaching the battery pack may result in damage to
the battery pack or the battery pack cover.
➡
•
•
•
•
•
Replacing the Battery Pack
Removing the Battery Pack
Move the lock slider in the direction of the arrow.
Remove the battery pack cover by hooking
a fingertip (nail) on the concave portion and
lifting it up in the direction of the arrow.
Remove the battery pack by pulling up on the
PULL tab.
Concave portion
Lock slider
PULL tab
Battery pack
Attaching the Battery Pack
With the PULL tab of the battery pack facing
up, align the contacts on the battery pack with
those of the cell phone and then insert the
battery pack securely.
Insert the tab of the battery pack cover into the
groove of the cell phone (
A
), and then close
the battery pack cover properly (
B
).
Press along the edges of the battery pack
cover in the direction of the arrows to make
■
➡
➡
➡
■
➡
➡
➡
1
2
3
4
1
3
2