Settings
97
Settings
Profiles
The tone sound and vibration settings can be customised for
each profile according to your environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”,
“Headset” and “Silent”.
Activating a Profile
“Settings”
→
“Profiles”
1.
Select the desired profile.
Note
•
When a profile is set, the corresponding indicator described
on page 19 is displayed in standby.
Tip
•
Long press
R
to switch Profiles settings between the
mode most recently activated and Silent mode in standby.
Resetting Profile Settings
“Settings”
→
“Profiles”
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select “Set to Default”.
3.
Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 112.
Ringer Volume
You can adjust the ringer and general volume.
“Settings”
→
“Profiles”
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select “Personalise”.
3.
Select “Volume”.
Each current volume level is displayed.
4.
Select “For Incoming Call”, “For New Message” or
“General Volume”.
5.
Press
a
(or
d
) to increase the ringer volume or press
b
(or
c
) to decrease the ringer volume and then press
B
.
To select “Increasing Volume”, press
a
(or
d
) at level 5.
To select “Silent”, press
b
(or
c
) at level 1.
Tip
•
You can select from two levels or an increasing volume,
when selecting the “Silent” profile.
(M 9)
(M 9-1)
