Settings
111
Backlight
With this setting On, the phone’s backlight is on when making
a video calling.
“Settings”
→
“Video Calling Settings”
→
“Backlight”
1.
Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the backlight
setting of the main display (p. 102).
Mute
You can mute the microphone while making a video calling.
“Settings”
→
“Video Calling Settings”
→
“Mute
Microphone”
1.
Select “Off” to cancel the mute.
Assigning Hold Guidance Picture
You can display an image saved in the phone on your main
display while you are putting a call on hold.
“Settings”
→
“Video Calling Settings”
→
“Hold
Guidance Pict”
1.
Select “Preset Picture” or “Picture Gallery”.
2.
Select the desired picture.
Security
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the PIN code
each time the phone is switched on. Your PIN code is registered
on the SIM/USIM card and you should have been made aware
of the code when you purchased the SIM/USIM card. Contact
your service provider for further details.
“Settings”
→
“Security Settings”
→
“PIN Entry”
→
“Switch On/Off”
1.
Select “On” to enable the PIN code or “Off” to disable.
2.
Enter your PIN code.
Note
•
If you enter the wrong PIN code three times in step 2, the
SIM/USIM card will lock. To remove the lock, contact your
service provider or SIM/USIM card vendor.
(M 9-8)
