118
Connectivity
Network Settings
Selecting a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
“Connectivity”
→
“Network Settings”
→
“Select
Service”
1.
Select “Auto”.
Selecting a Service Manually
“Connectivity”
→
“Network Settings”
→
“Select
Service”
1.
Select “GSM”.
Selecting a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Automatic”
Setting the Network Manually
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Manual”
1.
Select the desired network.
Adding a New Network
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Add New Network”
If there are no entries, press
B
and go to step 2.
If there is an entry, press
B
and perform the following steps.
1.
Select “Add”.
2.
Enter the country code (up to 3 digits).
3.
Enter the network code (up to 3 digits).
4.
Enter a new network name (up to 25 characters).
5.
Select “Select network type”.
6.
Select the desired network.
Editing the Preferred List
“Connectivity”
→
“Network Settings”
→
“Select
Network”
→
“Set Preferred”
1.
Select the name of the network you wish to edit.
2.
Select “Insert” to insert over the selected position, “Add
to end” to insert at the end or “Delete” to delete.
(M 12-2)
