Voice Call/Video Calling Functions
27
Making a Video Calling
Note
•
Use this function with only the video calling enabled phones.
•
Make sure that the battery is fully charged and the signal is
strong before using this function.
•
Turn the loudspeaker on or use a handsfree kit so that you
can talk while looking at the video calling screen on the main
display.
Making a Video Calling
1.
Enter the area code and the phone number you wish to
dial and press
S
, or press [Options] and select “Video
Calling” to dial.
If you enter the wrong number, press
U
to delete the
number to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
•
If the called party’s phone is not video calling enabled, you
can press
F
and enter the phone number again to make a
voice call.
Answering a Video Calling
When an incoming call is detected, the phone rings.
1.
Press
S
or
D
to answer the call by video or
A
[Answer] to answer the voice only.
Tip
•
If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
Rejecting an Incoming Call
1.
Press [Options] and select “Reject” while the phone is
ringing to reject a call you do not wish to answer.
Forwarding an Incoming Call to the Voice Mail Centre
1.
Press [Busy] or
F
while the phone is ringing to forward
the call to the Voice Mail centre.
