Voice Call/Video Calling Functions
29
Video Calling Settings
To Change the Quality of the Incoming Image
You can adjust the quality of the called party’s image.
1.
During a video calling, press [Options] and select “Video
Calling Settings”.
2.
Select “Incoming Picture Quality”.
3.
Select “Normal”, “Quality Priority” or “Frame Rate
Priority”.
“Normal”:
The standard quality is used.
“Quality Priority”:
The quality of the picture takes
precedence over the frame rate.
“Frame Rate Priority”:
The frame rate takes
precedence over the quality.
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1.
During a video calling, press [Options] and select “Video
Calling Settings”.
2.
Select “Backlight”.
3.
Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will always be
on during a video calling.
When “As Normal Setting” is selected, the backlight will
time out depending on the Backlight setting (p. 102).
To Adjust the Video Exposure
1.
During a video calling, press [Options] and select “Video
Calling Settings”.
2.
Select “Exposure”.
3.
Press
a
(Bright) or
b
(Dark).
Mirror Image
During a video calling, you can reverse your image on the sub
screen.
1.
During a video calling, press [Options] and select “Video
Calling Settings”.
2.
Select “Mirror Image”.
3.
Select “On” or “Off”.
To Change the Sub Camera Image to the Alternative Image
During a video calling, you can switch the image shown to the
caller between the sub camera image and an alternative image
or display an image while putting a call on hold from the saved
picture files.
1.
During a video calling, press [Options] and select “Video
Calling Settings”.
2.
Select “Alternative Image” or “Hold Guidance Pict”.
3.
Select “Preset Picture” or “Picture Gallery”.
