3-20
Qu
ick S
e
tu
p
Removing the Memory Card
1
Turn off the handset.
2
Open the SD memory card slot cover,
remove the card and close the cover.
Formatting the Memory Card
If you wish to clear all data stored in the memory card,
format the memory card according to the following steps.
The handset code is needed to format the memory card.
For information on the handset code, refer to “Enabling
the Handset Lock” on page 15-154.
1
Press
B
.
The main menu appears.
2
Press
a
,
b
,
c
or
d
to highlight “Settings”
and press
B
.
3
Press
a
or
b
to highlight “Memory card” and
press
B
.
4
Press
a
or
b
to highlight “Format” and press
B
.
5
Enter your handset code and press
B
.
If you wish to cancel, press
A
[Back] before
entering the handset code.
When you remove the memory card while the
handset is turned on, the message “Memory
card is removed” appears in the main display
and the memory card icon disappears from
both the main and external displays.
Do not remove the memory card while the
memory card is being formatted, written or
read.
e_tm200_7fm.book Page 20 Tuesday, November 9, 2004 9:14 PM