EN-15
ENGLISH
HUMIDIFYING FILTER / HUMIDIFYING TRAY
1.
Remove the
Humidifying Filter
and Tray.
2.
Rinse with plenty of water.
Float
Tray Panel
Roller
• Do not remove the Float and the
Rollers. If they come off, refer to
below.
3.
Attach the Humidifying Filter
and Tray.
Click
• After maintenance, correctly
reattach the parts.
NOTE
How to clean hard to remove dirt.
Kitchen detergent
(only Humidifying tray)
Citric acid
(available at some drugstores)
100% bottled lemon juice with
no pulp
1
1. Fill the tray half-way with
water.
2. Add a small amount of
kitchen detergent.
2 1/2 cups of water
3 teaspoons
3 cups of water
1/4 cup
2
Soak for
30 minutes.
Soak for 30 minutes.
(When using lemon juice as your
descaling solution, allow for more
soak time.)
3
Rinse off the kitchen detergent or the descaling solution with clean water.
NOTE
How to install the Float and the Rollers
Float
Roller
Click
Click
Tab
Float
Cross-Section view
3. Insert the tab on the
other side of the float
into the hole.
2. Insert the tab of the float
into the hole.
1. Insert the Float
under this tab.
Tab
Float
Cross-Section view
