background image

Loading Paper

8

Loading Paper

Letter or legal size paper can be 
loaded. 

Maximum number of sheets

 

(20-Ib. copy bond paper at room 
temperature)

Letter:

 

Approx. 

200 sheets 

(maximum stack height should not be 
higher than the line on the tray)

Legal size:

 100 sheets 

1

Fan the paper, and then tap the 
edges against a flat surface to even 
the stack.

2

Pull the paper plate forward and 
insert the stack of paper into the 
tray, 

print side up

.

Pull the received document 
tray extension all the way out

Attach the 
document exit tray 
and flip out the 
extension 

Attach the paper tray 

The stack must 
not be higher 
than this line

If paper remains in the tray, take it 
out and combine it into a single stack 
with the new paper.

Printing on the reverse side of the 
paper may result in poor print quality. 

Do not use paper that has already 
been printed on or is curled.

Remove received faxes and other 
printed output before about 50 
sheets (10 legal-size sheets) 
accumulate in the received 
document tray (otherwise the sheets 
may scatter).

If you loaded legal size paper...

You must change the “PAPER SIZE” 
setting to “LEGAL” (pp. 45 and 49). 
(Before changing the setting, plug in 
the power cord and install a print 
cartridge as explained in the following 
sections.)

Summary of Contents for UX-B800SE - B/W Inkjet - Fax













































































Reviews: