q
Simple Recording Timer
There are two ways to use this Simple Recording Timer for
l
Immediate recording.
your convenience.
Convenient when having an
unexpected visitor or
telephone call.
l
Delayed recording:
Convenient when leaving the house or going to bed
Select the channel position to be recorded by pressing
CHANNEL
Channel position: 2)
Press REC to enter the normal recording mode. Then,
press REC repeatedly to set the desired ending time.
(Ex.: Ending time:
AM)
l
Each press of REC increases the stop
by minutes.
l
Press STOP to terminate recording
Select the channel position to be recorded by pressing
(Ex. : Channel position: 2)
Set the starting time by pressing
(Ex.: Starting
time:
AM)
l
Each press of
Increases the start time by minutes.
*Setting the time within a
period in IO-minute intervals is
possible.
Set the ending time by pressing REC. (Ex.: Ending time.
AM)
l
Each press of REC
the stop time by minutes.
Press STANDBY to turn to the POWER STANDBY mode.
(See page 5, item 2.)
(Ex.: Present time:
AM)
l
After the Simple Recording Timer is set, the channel position cannot be changed
confirm the starting time and the ending time, first turn on the power. Then press
to confirm the
and
ending time. And turn to the POWER STANDBY mode.
l
To clear the Simple Recording Timer setting during setting of “Delayed Recording”, press CLEAR on the remote control. To
clear after setting, turn on the power, press
to select Simple Recording Timer mode, and then while the
time
IS
flashing, press CLEAR.
*The Simple Recording Timer cannot be set the timer has been preset
indicator on the VCR display is lit)
If this is the
case, cancel the timer standby mode by pressing TIMER ON/OFF, turn on the power and then proceed with setting of the
Simple Recording Timer
fur
the
(Standard
(tong
recording speed
TAPE SPEED on the
remote
tight up an the
(Standard
gives the best
quality.
Play) gives the
time.
l
The stop time for delayed recording must be set within 10 seconds of setting the start time,
start time must be set
again.
21
