Remote Control
Inserting the Batteries
Make sure that the batteries have been properly installed first. Fit three batteries type
“AA”. If the remote control stops working, fit new batteries.
Ensure the batteries are fitted correctly, matching the polarities (
j
/
k
) indicated in the
remote control.
• The operating life of the batteries will shorten if the Remote Pager function is frequently
used.
• After changing the batteries in the remote control, the code settings for the TV, cable box
and Digital Satellite Receiver must be re-entered.
• Do not subject the remote control to shock, water or excessive humidity.
• The remote control may not function if the VCR sensor is in direct sunlight or any other strong light.
• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.
• Do not mix old and new batteries, or mix brands in use.
• Remove the batteries if the remote control will not be operated for an extended period of time.
• If the remote control does not function properly when new batteries are installed, remove the batteries and wait 5 minutes
before re-installing them.
