background image

11

www.sharp.co.uk/support

BASIC OPERATION

HOW TO PLAYBACK A VIDEO TAPE

FAST FORWARDING/REWINDING A VIDEO TAPE

1.

Press

 STOP

 

 to stop the video tape.

2.

Press the 

FAST FORWARD

/

REWIND

 

buttons on the remote control 

or

  on 

the VCR front panel.

3.

To stop fast forward/rewind, press 

STOP

 

.

FORWARD/REVERSE VISUAL SEARCH

1.

During playback to select search mode,  press the 

FAST FORWARD

 or

 REWIND

  

 buttons on 

the remote control, 

or

 on the VCR front panel. 

2.

Press the 

PLAY/X2

 

 button to resume playback.

OR

3.

To decrease the speed, during visual search mode press 

FAST FORWARD

 or 

REWIND

  

 again.

4.

Press the 

PLAY/X2

  

button.

NOTE: 

IMMEDIATE RECORDING

SELECTION OF A CHANNEL

Select the channel you wish to record by using the 

NUMBER

 

BUTTONS

 on the VCR remote 

control, or select the next/previous channel by pressing the

 CHANNEL 

/

  buttons 

on the remote control or on the VCR front panel.

To change between single digit and 2-digit channel numbers, press the 

 button.

For example, for channel 24, press the 

 button then press 

2

 

4

.

There will be picture interference and possibly a change to black and white picture 
using Visual Fast Forward/Rewind functions.

FF 

REW

DPSS

SLOW

TAPE

SPEED

REC

PAUSE/STILL    

REW

FF 

PLAY / X2

STOP

FF 

REW

PLAY / X2

FF 

REW

PLAY / X2

REMOTE CONTROL

TINS-A079UMN1.book  Page 11  Monday, November 4, 2002  1:01 PM

Summary of Contents for VC-MH705HM












































Reviews: