background image

V L - A 1 1 0 U / p p .   0 0 5 - 0 0 6 ;   0 0 / 1 1 / 2 1 / 1 8 : 0 0

G. K .   A s s o c i a t e s ,   To k y o

6

Operation Summar

y

Warning Indicators

The video cassette is defective and should be
removed (see page 10).

Dew has formed inside the VIEWCAM. Wait for a few
hours until the dew disappears (see page 51).
About 10 seconds after this warning appears, the
VIEWCAM automatically turns off.

The battery is almost depleted. Replace it with a
fully charged battery pack (see page 7).

The video heads are clogged and should be
cleaned (see page 51).

There is no video cassette in the VIEWCAM. Insert a
cassette (see page 10).

The erasure protect tab on the video cassette has
been slid to the record-protect position, preventing
recording (see page 53).

The tape is about to end. Prepare a new cassette
(see page 10).

The tape has reached the end. Replace it with a
new cassette (see page 10).

In Self Recording mode, all warnings will be
indicated by 

 displayed in the center of the

monitor. To check the type of warning, rotate the
monitor back to the normal position.

Displayed for the first

3 seconds

Displayed after

3 seconds

Description of warning

Note: 

 indicates a flashing display.

Summary of Contents for VIEWCAM VL-A110U









































































Reviews: