background image

V L - A 1 1 0 U / p p .   0 5 0 - 0 5 4 ;   0 0 / 11 / 2 1 / 1 8 : 0 0

G. K .   A s s o c i a t e s ,   To k y o

53

References

References

Using Your VIEWCAM  Abroad

Television signal standards and electrical
voltages and frequencies vary substantially
from country to country. When you are abroad,
check the sections below before using the AC
adapter or connecting the VIEWCAM to a TV.

AC Adapter (Supplied Accessory)

The supplied AC adapter is compatible with
50 Hz and 60 Hz electrical systems in the
range of 110 V to 240 V AC.
An AC plug adapter may be required
depending on the design of the electrical
outlet.

Television Signal Standards

In any country, you can always watch the video
picture by using the LCD monitor screen.
However, if you want to watch the picture on a
TV screen, the TV must be NTSC-M system
compatible. NTSC-M is used in the following
areas:
The Bahamas, Barbados, Bermuda, Myanmar
(previously Burma), Canada, Chile, Colombia,
Costa Rica, Cuba, the Dominican Republic,
Ecuador, El Salvador, Greenland, Guam,
Guatemala, Haiti, Honduras, Jamaica, Japan,
South Korea, Mexico, the Netherland Antilles,
Nicaragua, Panama, Peru, the Philippines,
Puerto Rico, St. Kitts, St. Lucia, Surinam,
Taiwan, Trinidad, the U.S.A., Venezuela,
Southern Vietnam, and the Virgin Islands.

Video Cassette Tapes

Use only tapes with the 

 mark with this

VIEWCAM.

To protect recordings against erasure

When a previously recorded cassette is used
again for recording, the previously recorded
material is erased. To protect a recording
against accidental erasure, slide the tab on the
cassette to cover the opening. (A red mark will
be exposed.) To record, slide the tab to open
the opening.

Notes:

• Do not insert anything into the erasure-protection

opening in the cassette.

• Do not put anything into the holes on the bottom

of the cassette.

• Do not store or place your video tapes in direct

sunlight, near heaters, or in places with
excessive moisture or dust.

• Do not keep video tapes near magnetic objects

as they may erase the recording.

• Do not drop or subject the tapes to excessive

shocks.

• Uneven tape winding will damage the tape. If the

tape is not properly wound, reinsert it in the
VIEWCAM and rewind the tape.

• Store the cassettes in their cases and stand

them upright.

AC 110–240 V

Suitable AC plug adapter

Summary of Contents for VIEWCAM VL-A110U









































































Reviews: