Useful Features
37
Self recording with reversed
grip
Rotate the grip 90° and the LCD monitor
180° vertically so that you can record
yourself while holding the grip.
3
Open the LCD monitor to a 90° angle
to the camcorder body (
1
), and then
rotate it 180° vertically (
2
).
4
Set the Power switch to
v
.
5
Press the Start/Stop button to begin
recording.
Notes:
• Do not rotate the monitor section to the self
recording position during recording or
playback.
• During self recording, the mode or menu
screen cannot be displayed.
• All of the manual settings are set to AUTO
and some other settings will set to OFF in self
recording.
• You may experience image noise when using
self recording.
• To operate self recording with reversed grip
correctly, make sure to turn the grip and the
lens section so that the Start/Stop button and
the tripod socket face upward, and the lens
faces toward you. The
I
indicator will
appear.
• Be sure that the LCD monitor rotation is
exactly 180°, otherwise the image recorded
will be rotated 180° upside-down.
• The viewfinder does not work in self
recording with reversed grip.
1
Turn the camcorder downward as
shown below.
2
Rotate the lens section 90° vertically
as shown below.
90˚
180˚
90°
