E-9
ENGLISH
WF-1100W
2008/November/6
WF-1100W_MK2-EN
MK2
Tape Playback
Listening to a cassette tape (TAPE 1 or TAPE 2) (continued)
Notes:
When the end of tape is reached during the fast forward and
rewind mode, the unit will continue running in fast forward/rewind
state and the F FWD or REWIND button will not be released.
Press the STOP/EJECT button.
Auto stop system is only activated during playback and recording
mode.
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT button.
Precautions:
Be sure not to press the PLAY and REWIND buttons
simultaneously, or the tape will become damaged.
Before changing from one tape operation to another, press the
STOP/EJECT button.
If TAPE 1 and TAPE 2 are played simultaneously, only the sound
from TAPE 2 will be audible.
The TAPE 2 DIRECTION indicator refers to the travel direction for
TAPE 2 [side A(1) or side B(2)]. It is not related to the movement
of TAPE 1.
Tape 2 playback (both tape sides)
To change the side of tape:
Press the DIRECTION switch during playback.
To listen to side A(1), the TAPE 2 DIRECTION “A” indicator will be
illuminated.
To listen to side B(2), the TAPE 2 DIRECTION “B” indicator will be
illuminated.
To fast wind the tape:
Press the STOP/EJECT button, then the FAST button (
or
) as
desired.
1
Set the FUNCTION switch to TAPE.
2
Press the STOP/EJECT button and load a cassette into the
TAPE 2 cassette compartment.
3
Set the REVERSE MODE switch to
to listen to each
tape side once, or
for endless repeat of the entire tape.
When the
setting of the REVERSE MODE switch is
selected, playback always stops at the end of side B(2).
4
Press the PLAY button of TAPE 2.
The POWER indicator will light up.
S
TOP/EJECT
PAU
S
E
PLAY
DIRECTION
S
TOP/EJECT
PLAY
FA
S
T
REVER
S
E
MODE
POWER/TAPE 2
DIRECTION
TAPE 1
TAPE 2
FUNCTION
