E-10
ENGLISH
WF-1100W
1
2008/November/6
WF-1100W_MK2-EN
MK2
Tape Recording
Caution:
When the end of the tape is reached during fast forward/rewind
operation, the tape will stop, but the motor will continue to rotate.
Press the STOP/EJECT button immediately.
To stop playback:
Press the STOP/EJECT button.
Continuous playback (TAPE 2 to TAPE 1)
Note:
When in the continuous play mode, pressing the STOP/EJECT
button of TAPE 2 will start TAPE 1 automatically.
Recording to a cassette tape
1
Press the STOP/EJECT button and load cassettes into the
TAPE 1 and TAPE 2 cassette compartments.
2
Set the REVERSE MODE switch to
.
The continuous playback function will not operate when the
REVERSE MODE switch is set to
.
3
Press the PLAY button of TAPE 2.
4
Press the PAUSE button of TAPE 1.
5
Press the PLAY button of TAPE 1.
When TAPE 2 stops at the end of the tape, the PLAY button
of TAPE 2 and the PAUSE button of TAPE 1 will be
automatically released, and TAPE 1 will start playing.
6
Select side A(1) or side B(2) on TAPE 2 with the DIRECTION
switch.
When playback begins from side A(1) on TAPE 2, the
playback sequence will be as follows:
TAPE 2 side A(1)
→
side B(2)
→
TAPE 1 side A(1)
→
stop.
When playback begins from side B(2) on TAPE 2, the
playback sequence will be as follows:
TAPE 2 side B(2)
→
TAPE 1 side A(1)
→
stop.
Before recording:
When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
The volume and sound controls can be adjusted with no effect
on the recorded signal (Variable Sound Monitor).
For recording, use only normal tapes. Do not use metal or
CrO
2
tapes.
Erase-prevention tab of cassette tapes:
When recording on a cassette tape, make sure that the
erase-prevention tabs are not removed. Cassettes have
removable tabs that prevent accidental recording or erasing.
To protect the recorded sound, remove the tab after recording.
Cover the tab hole with adhesive tape to record on the tape
without the tab.
Tab for side B
Tab for side A
Side A
