Sharp WF-2100BK, Service Manual

WF-2100W

– 2 –

FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER
TO THE OPERATION MANUAL.

VOLTAGE SELECTION

SPECIFICATIONS

General

Power source:

AC 110-127 V/220-240 V,
50/60 Hz
DC 15 V [“D” size
(UM/SUM-1, R20 or HP-2)
battery 

×

 10]

Power consumption:

33 W

Output power:

MPO (Max.); 50 W (25 W +
25 W)
(AC operation)
RMS; 25 W (12.5 W + 12.5 W)
(DC operation, 10 % T.H.D.)

Input terminal:

Mixing microphone; 1 mV/600 ohms
CD/LINE; 350 mV/47 kohms

Output terminal:

Headphones; 16-50 ohms
(recommended; 32 ohms)

Dimensions:

Width; 282 mm (11-1/8")
Height; 217 mm (8-9/16")
Depth; 207 mm (8-1/8")

Weight:

3.5 kg (7.7 lbs.) without batter-
ies

Radio section

Frequency range:

FM;

88 - 108 MHz

SW1; 2.3 - 7.3 MHz
SW2; 7.3 - 22 MHz
MW; 526.5 - 1,606.5 kHz

Tape recorder section

Frequency response:

60 - 12,000 Hz (Normal tape)

Signal/noise ratio:

40 dB (TAPE 1, recording/playback)
50 dB (TAPE 2, playback)

Wow and flutter:

0.3 % (WRMS)

Motor:

DC 9 V electric governor

Bias system:

AC bias

Erase system:

Magnet erase

Speaker section

Speakers:

7.5 cm (3") woofer 

×

 1

9 cm (3-9/16") woofer 

×

 1

Super tweeter 

×

 1

5 cm (2") tweeter 

×

 1

Maximum input power: 25 W
Rated input power:

12.5 W

Impedance:

8 ohms

Dimensions:

Width; 235 mm (9-1/4")
Height; 235 mm (9-1/4")
Depth; 192 mm (7-9/16")

Weight:

2.0 kg (4.4 lbs.)/each

Before operating the unit on mains, check the preset voltage. If the voltage is different from your local voltage, adjust the voltage
as follows. Slide the selector with a screwdriver to the appropriate voltage number. (AC 110 - 127 V or AC 220 - 240 V).

Specifications for this model are subject to change without
prior notice.

AC POWER SUPPLY CORD AND AC PLUG ADAPTOR

QACCA0004AW00

QACCE0007AW00

QPLGA0003AWZZ

QPLGA0004AWZZ