06/2/23
WF-5000W(U)NEW1.fm
E-6
TINSEA095AWZZ
Preparation for Use
WF-5000W
ENGLISH
Detachable speakers
Mounting the speakers to the main unit
Fit the grooves of the speaker to the guides on the main unit, and then slide
the speaker all the way down to lock it in place.
Removing the speakers from the main unit
Push the RELEASE lever as shown in the illustration to unlock the speaker,
and then lift up the speaker to remove it from the main unit.
Speaker connection
Connect each speaker wire to the SPEAKER terminals as shown. Use
speakers with an impedance of 8 ohms or more, as lower impedance speak-
ers can damage the unit.
Caution:
Supplied AM Loop aerial:
Set the FUNCTION switch to STAND-BY before connecting or
disconnecting the speakers.
1
2
3
Red
Red
Right speaker
Left speaker
Black
Connect the black wire to the minus (-) terminal, and the red wire to the plus
(+) terminal.
Do not mix the right channel and left channel wiring when connecting the
speakers to the unit.
Do not let the bare speaker wires touch each other as this may damage the
amplifier and/or speakers.
Do not stand or sit on the speakers. If the speakers fall or collapse, you may
be injured.
Connect the AM loop aerial to the AM LOOP socket. Position the AM loop
aerial for optimum reception.
Note:
Placing the aerial on the unit or near the AC power lead may cause noise
pickup. Place the aerial away from the unit for better reception.
Aerial Adjustment
