06/2/22
WF-5000W(U)2.fm
E-8
TINSEA095AWZZ
Preparation for Use
WF-5000W
ENGLISH
DC power connection
Plug the AC Adaptor/Car Adaptor into the wall socket/car supply socket then
insert the plug on the other end into the DC IN 12V socket.
Connection of the AC power lead to the unit disconnects the DC power supply.
Caution:
Use only AC Adaptor/Car Adaptor with DC 12V output voltage.
Insert the plugs firmly.
When the unit is not in use for extend periods, remove the AC Adaptor/Car
Adaptor from the wall socket/car supply socket.
Operation with batteries
Precautions for battery use:
Insert the batteries according to the direction indicated on the rear panel.
Remove the batteries if they are weak or if the unit will not be used for long
periods of time. This will prevent potential damage due to battery leakage.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Battery replacement:
Replace the batteries when they become weak and/or recording or playback
is impaired. This may occur even though radio broadcasts are audible.
Attention-connection of DC lead and battery termi-
nals.
ª
: Connect the red battery clip to (+) on the
battery terminal.
·
: Connect the black battery clip to (–) on
the battery terminal.
DC power can only be used for a 12V battery.
Do not use any battery besides a 12V.
To the wall socket
AC Adaptor
Socket: 12VDC
Car Adaptor
Socket: 12VDC
To DC IN
12V socket
OR
12V
Red
Black
24V
1
Disconnect the AC power lead, and remove the battery compartment
cover.
Connection of the AC or DC power lead to the unit disconnects the
batteries.
2
Insert 10 "D", size batteries (UM/SUM-1, R20, HP-2 or similar) into the
battery compartment.
When inserting or removing the batteries
5
and
!
, push them towards
the
·
battery terminals.
Installing the batteries incorrectly may cause the unit to malfunction.
Batteries are not included.
3
Replace the battery compartment cover.
1
2
3
5
4
7
6
9
10
8
