32
Function parameters for
r
,
R
,
C
,
c
,
b
and
A
(when using as TL key)
*
1:
Item:
Selection:
Entry:
A
Footer printing*
Allow
1
Disallow*
0
B
Amount tendered entry*
Compulsory
1
Non-compulsory (for
C
and
A
)*
0
Inhibit (for
c
and
b
)*
0
C
Entry digit limit
For
C
,
c
,
b
and
A
0-8 (default:8)
For
r
and
R
0-9 (default:9)
*When programming for
r
or
R
, always enter 0 for A and B.
Footer printing (only for
C
,
c
,
b
and
A
)
• This programming decides whether or not the machine should print a message at the foot of a receipt when a
specified media key is used. With regard to programming method of footer logo message, refer to “Logo
messages” section on page 37.
Amount tendered compulsory (only for
C
,
c
,
b
and
A
)
• You may select amount tendered, compulsory or optional, for the
A
and
C
keys.
• You may select amount tendered, compulsory or inhibited, for the
c
and
b
keys.
Entry digit limit
• For the
C
,
c
,
b
,
r
and
R
keys program upper limit entry amount for the tendered amount. For the
A
key, program upper limit entry for total cash amount which can be handled on the register. The entry
digit limit is in effect for REG-mode operation but can be overridden in the MGR mode. The entry digit limit is
represented by the number of allowable digits for the maximum entry or total amount. When “0” is set, the
operation of the corresponding key is prohibited.
From left, ABC
018
@
C A
Key operation example
*
1
ABC or
A
To program “0” for all items
To program for another key
*
2
:Press
s
key for TL key setting.
@
s
,
C
,
c
,
b
,
r R
*
2
A201_3 FOR THE MANAGER 01.11.11 10:22 AM Page 32
