Sharp XE-A212, Service Manual

XE-A212V

OPTIONS

– 5 –

CHAPTER 2. OPTIONS

1. OPTIONS (No)

2. SERVICE OPTIONS (No)

3. SUPPLIES

4. SPECIAL SERVICE TOOLS

CHAPTER 3. MASTER RESET AND PROGRAM RESET

1. MASTER RESETTING

Master resetting clears the entire memory and resumes initial values.

Master resetting can be accomplished by using the following procedure:

Procedure A:

1) Plugin the AC cord to the wall outlet.

2) Set the mode switch to REG position.

3) Let the ECR be witout the memory backup battery.

4) Unplug the AC cord from the wall outlet.

5) Wait over 1 minute for discharging.

6) Plugin the AC cord to the wall outlet.

The master reset can also be accomplished in the following case.

In case power failure occurs when the machine has no battery

attached to it, the master reset operation is automatically performed

after the power has been restored.

(This is because if power failure occurs with no battery attached to
the machine, all the memories are lost and the machine does not

work properly after power recovery; this requires the master reset

operation.)

2. PROGRAM RESETTING

(INITIALIZATION)

This resetting resumes the initial program without clearing memory.

This resetting can be operated at below sequence in PGM mode.

Procedure:

1) Unplug the AC cord from the wall outlet.

2) Wait over 1 muinite for discharging.

3) Set the mode switch to the PGM position.

4) While holding down the FEED key, plugin the AC

cord to the wall outlet.

Note: In case power failure occurs when the machine has no battery

attached to it, the master reset operation is automatically per-

formed after the power has been restored.

NO

NAME

PARTS CODE

PRICE 

RANK

DESCRIPTION

1

Roll paper

TPAPR6645RC05

AY

5roll/pack

NO

NAME

PARTS CODE

PRICE 

RANK

DESCRIPTION

1

RS-232 Loop-back connector

UKOG-6705RCZZ

BU