62
5.
Entry digit limit programming
(Press
s
to skip. / Press
A
to terminate.)
6.
Terminate programming
Item:
Selection:
Print:
A
Footer print
No*
0
Yes
1
B
Amount tendered entry
Non compulsory (for
X
and
Y
)*
0
Inhibit (for
c
and
b
)*
0
Compulsory 1
C
Entry digit limit
0-8 (default:8)
From left, ABC
Text
PGM
0.00
A
(1) Press the
A
key to terminate the
X
key
programming.
CH2 PRORAMMING
34 0.00
ENTER[00]KEY
34 0.00
s
(2) Press the
s
key to register the setting.
In the case of programming for the
X
and
c
keys, "CH2 PROGRAMMING" and "CR2
PROGRAMMING" respecitively will be displayed on
the upper line, and the corresponding function no.
on the lower line. Go to step 2 to program the
Y
and
b
keys.
In the case of programming for the
r
,
R
,
Y
and
b
keys, the display shows
"ENTER[TL/NS]KEY". Go to step 6.
LIMIT DIGITS
33 7
7
(1) Enter entry digit limit using numeric key.
The entry digit limit can be set up to 8.
Default setting is 8.
The entry digit limit is in effect for REG mode
operation but can be overridden in the MGR mode.
The entry digit limit is represented by the number of
allowable digits for the maximum entry or total
amount. When "0" is set, the operation of the
corresponding key is prohibited.
A303_3(En) 06.7.22 4:41 PM Page 62
