Adjusting point
Adjusting conditions
Adjusting procedure
24 Audio system
l
In the process mode, select L3. Check the bass,
performance
and balance.
check
25
R G B
performance
check
26 Off-timer
performance
check
27
Lens shift
adjustment
Receive the RGB signal.
Group LENS
Subject LENS AUTO
l
In the process mode, select L4. Check the picture,
brightness, red, blue, clock, phase, horizontal
tion, and vertical position.
l
In the process mode, select OFF. Make sure that the
off-timer starts with
(minutes), counts down each
minute in 1 second, and turns off the set at
l
Adjust the lens center position (for the lens center to
come to the mark on the front cabinet).
l
When the ENTER key is pressed after choosing the
subject LENS AUTO, the data is fed automatically.
28 Factory settings
l
Execute
of the group
to make the factory
settings.
2 6
