– 7 –
XL-3500H
2
2
Accessories
1
1
1
2
3
Battery installation of remote control
Use 2 “AAA” size batteries (UM-4, R03, HP-16 or similar).
Batteries are not included.
Remove the
Insert the batteries
Replace the cover.
battery cover.
as shown.
AM loop aerial x 1
AC power lead x 1
Remote control x 1
FM aerial x 1
Speaker wire x 2
(Except for U.K.)
(For U.K.)
"AAA" size battery (UM-4,
R03,HP-16 or similar)
(Except for U.K.)
2
System Connections
3
3
Right speaker
Left
speaker
Connection cable
for digital recording
(not supplied)
MD recorder
To the optical line
input socket
Wall socket
(AC 230 V, 50 Hz)
To the line
output sockets
RCA lead
(not supplied)
FM aerial
AM loop aerial
VCR, DVD, etc.
TV
Right speaker
Left speaker
Black
White line
Headphones
(CD only)
(Except for U.K.)
(For U.K.)
Press the ON/STAND-BY button to turn the power on.
Turn on your System
4
4
Listening to a CD
1
Press the FUNCTION button until “CD STOP” appears on
the display.
If no disc is loaded, the display will be “NO DISC” instead of
“CD STOP”.
2
Press the
7
7
7
7
7
OPEN/CLOSE button to open the CD com-
partment.
3
Place a CD on the spindle, label side up.
4
Press the
7
7
7
7
7
OPEN/CLOSE
button to close the CD com-
partment.
The CD playback will start automatically.
FM stereo mode indicator
FM stereo receiving indicator
If trouble occurs
■
■
When this product is subjected to strong external interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may mal-
function.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2. If the unit is not restored in step 1, unplug and plug in
the unit, and then turn the power on.
3. If neither step 1 nor 2 restores the unit, do the following:
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 Unplug the AC power lead from the AC INPUT socket
on the unit.
3 Whilst pressing down the MEMORY/SET button and the
4
4
4
4
4
button, plug the AC power lead into the AC INPUT
socket on the unit.
Maintenance
Do not touch the laser pickup lens. If fingerprints or dust accu-
mulate on the pickup, clean it gently with a dry cotton swab.
AC INPUT
Listening to the Radio
1
Press the FUNCTION button until “FM” or “AM” appears
on the display.
2
Press the TUNING (
X
X
X
X
X
or
W
W
W
W
W
) button to tune in to the de-
sired station.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable
broadcast station.
3
To receive an FM stereo
transmission:
Press the FUNCTION but-
ton to display the “ST” in-
dicator.
●
“
j
” will appear when an
FM broadcast is in stereo.
Summary of Contents for XL-3500H
Page 55: ...XL 3500H MEMO ...
