background image

02/11/22

XL_35W_SCA_1.fm

3

XL-35W
   

G

e

neral Inf

o

rm

ation

Precautions

"

General

!

Please ensure that the equipment is positioned in a well-venti-
lated area and that there is at least 10 cm (4") of free space along
the sides and back. There must also be a minimum of 20 cm (8")
of free space on the top of the unit.

 

!

Use the unit on a firm, level surface free from vibration.

!

Keep the unit away from direct sunlight, strong magnetic fields,
excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generate electrical
noise.

!

Do not place anything on top of the unit.

!

Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.

!

If the system does not work properly, unplug and plug it in again.
Then turn on the system.

!

In case of an electrical storm, unplug the unit for safety.

!

Hold the AC power plug by the head when removing it from the
wall socket, as pulling the lead can damage internal wires.

!

Do not remove the outer cover, as this may result in electric
shock. Refer internal service to your local SHARP service
facility.

!

The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.

!

No naked flame sources, such as lighted candles, should be
placed on the apparatus.

!

Attention should be drawn to the environmental aspects of bat-
tery disposal.

!

This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).

Warnings:

!

The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible
for any damage resulting from use of this unit with a voltage other
than that which is specified.

!

CD players use a laser pickup which can damage the eyes if
viewed directly. Do not look at the pickup, and do not touch
the pickup directly.

 

"

Volume control

The sound level at a given volume setting depends on speaker effi-
ciency, location, and various other factors. It is advisable to avoid
exposure to high volume levels, to avoid this do not turn the volume
on to full at switch on and listen to music at moderate levels.
 

10 cm (4")

10 cm (4") 10 cm (4")

20 cm (8")

Summary of Contents for XL-35W

































Reviews: